Centrifuge aftermarket · chemical & fertilizer industry

Spare parts for the centrifuges that stop your plant.

We reverse-engineer, machine and balance replacement parts for SIEBTECHNIK TEMA, ANDRITZ, Flottweg and Ferrum pusher and decanter centrifuges. Most customers start with one part. Overhauls and field service come later, when you have seen how we work.

2–6 weeksproduction time, excluding ocean freight — vs 8–16 from OEM
2,900 m²machining, welding and balancing workshop
12 engineersfield service, 10+ years each
24 hresponse on breakdown calls

What we make

Every part starts from your machine, not from a catalogue. Send the nameplate and the damaged part; we measure, draw, machine and balance to fit.

01

Wear parts

Screens, filter segments, scraper blades, wear plates, nozzle bushes, feed pipes. Carbide and alloy upgrades where the original keeps failing.

02

Drive & bowl assembly

Differential gears, scrolls, bowl shells, shafts, bearing sets, seals and hydraulic units — the parts that decide whether an overhaul is worth doing.

03

Exchange units

A rebuilt assembly shipped ahead of your shutdown window, so the plant is down for days, not weeks.

PHOTO SLOT — workshop / machining (to be shot or retouched)

How a relationship usually starts

Nobody signs a maintenance contract with a supplier they have never bought from. We expect to earn it in three steps.

STEP 1 · START HERE

One part, one machine

You send the nameplate and the failed part. We quote in 48 hours, machine it, and ship with full documentation. No minimum order, no framework contract.

STEP 2

Repair, when it is needed

If the damage is beyond a part swap, the assembly comes to our workshop — or our crew comes to you. Same engineers, same measurements.

STEP 3

Planned maintenance

Once the machines and the people are known, an annual agreement makes sense: scheduled inspections, stocked fast movers, guaranteed response.

For local service companies

If you maintain centrifuges for your own customers, we would rather supply you than compete with you.

  • Trade pricing on repeat parts, quoted against your annual volume rather than one-off orders.
  • Neutral documentation — drawings and certificates issued without our brand on the customer-facing copy, if you need it that way.
  • Technical backup — dimensions, material advice and fitting guidance from the engineers who make the part.
  • No end-customer contact from us in your territory.
PHOTO SLOT — parts on the shelf / dispatch

Machines we support

Our experience is concentrated in pusher and decanter centrifuges used in potash, soda ash, ammonium sulphate, caprolactam, ABS, citric acid and pharmaceuticals.

OEMSeries / modelsTypical applications
SIEBTECHNIK TEMASHS 692 / 802 / 903 / 970 / 1103, SZ, TS / TSDT, H450 / H520, TS650Potash, soda ash, ammonium sulphate, ABS, citric acid
ANDRITZSZ 800 / SZ 1000Soda ash, salt, fertilizer
FlottwegDecanter seriesChemical sludge, minerals, food
FerrumP60 / P80Ammonium sulphate, fertilizer
Tomoe / Chinese OEMsPusher and decanter rangesGeneral chemical

Not on the list? Send the nameplate anyway — if we cannot make it, we will say so within two working days.

When a part is not enough

Field repair, return-to-workshop overhaul, and technical upgrades — carried out by the same engineers who machine the parts. This is the second step, not the first: we will not ask you to fly a crew in before you have tested us on a part.

  • On-site repair. Vibration, leakage, carry-over, gearbox noise. Crews mobilised within 24–72 hours.
  • Workshop overhaul. Full strip-down, inspection, bearing and seal replacement, balancing, test run.
  • Upgrades. Differential localisation, screen and scraper material upgrades, hydraulic system rebuilds.
  • Remote diagnosis. Photos, video and vibration data reviewed before anyone books a flight.
PHOTO SLOT — field service / overhaul

What ships with the part

Purchasing departments ask for documents, not adjectives. Every shipment includes:

Material certificateEN 10204 3.1, with heat number and chemical composition
Dimensional reportCritical dimensions measured on a coordinate measuring machine
Balancing reportResidual unbalance recorded on a SCHENCK balancing machine

Manufacturing base

Machining, welding, balancing and inspection under one roof, working to an ISO 9001 quality system: CNC gantry machining centre, CNC vertical lathes, machining centres, laser welding, wire EDM, rolling; SCHENCK balancing, CMM, optical emission spectrometer, hardness and coating thickness testing.

Certificate scope and validity available on request during supplier qualification.

PHOTO SLOT — metrology / balancing

Send us a nameplate

Two photos — the machine nameplate and the damaged part — are usually enough for a first answer within 48 hours.

We reply within two working days. Technical data is treated as confidential and never shared with third parties.